Lifts

An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). more...

Home
Bath & Body
Dietary Supplements,...
Hair Care
Hair Removal
Health Care
Massage
Medical, Special Needs
Bathroom Safety
Braces, Supports
Hearing Assistance
Incontinence Aids
Mobility Equipment
Lifts
Other
Ramps
Scooters
Walkers & Canes
Wheelchairs
Electric
Manual
Other
Monitoring, Testing
Orthotics, Insoles
Other
Positioning Equipment
Respiratory Aids
Nail
Natural Therapies
Oral Care
Other Health & Beauty Items
Skin Care
Tattoos, Body Art
Vision Care
Weight Management
Wholesale Lots

Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.

Design

Elevators began as simple rope or chain hoists. An elevator is essentially a platform that is either pulled or pushed up by a mechanical means. A modern day elevator consists of a cab (also called a "cage" or "car") mounted on a platform within an enclosed space called a shaft, or in Commonwealth English called a "hoistway". In the past, elevator drive mechanisms were powered by steam and water hydraulic pistons. In a "traction" elevator, cars are pulled up by means of rolling steel ropes over a deeply grooved pulley, commonly called a sheave in the industry. The weight of the car is balanced with a counterweight. Sometimes two elevators move always synchronizedly in opposite direction, and they are each other's counterweight.

The friction between the ropes and the pulley furnishes the traction which gives this type of elevator its name.

Hydraulic elevators use the principal of hydraulics to pressurize an above ground or in-ground piston to raise and lower the car. Roped Hydraulics use a combination of both ropes and hydraulic power to raise and lower cars. Recent innovations include permanent earth magnet motors, machine room-less rail mounted gearless machines, and microprocessor controls.

Which technology is used in new installations depends on a variety of factors. Hydraulic elevators are cheaper, but installing cylinders greater than a certain length becomes impractical for very high lift hoistways. For buildings of much over seven stories, traction elevators must be employed instead. Hydraulic elevators are usually slower than traction elevators.

History

In 1823, an "ascending room" made its debut in London.

In 1853, Elisha Otis introduced the safety elevator, which prevented the fall of the cab if the cable broke. The design of the OTIS safety is somewhat similar to one type still used today. It consists of knurled roller(s) that lock the elevator to its guides should the elevator descend at an excessive speed, which is monitored by a governor device.

On March 23, 1857 the first Otis elevator was installed at 488 Broadway in New York City. The first elevator shaft preceded the first elevator by four years. Construction for Peter Cooper's Cooper Union building in New York began in 1853. An elevator shaft was included in the design for Cooper Union, because Cooper was utterly confident a safe passenger elevator would soon be invented; the shaft however was circular because Cooper felt it was the most efficient design. Later Otis designed a special elevator for the school. Today the Otis Elevator Company, now a subsidiary of United Technologies Corporation, is the world's largest manufacturer of vertical transport systems, followed by Schindler, Thyssen-Krupp, Kone and Fujitec.

Read more at Wikipedia.org